Acetylene torch, induction and resistance heating

Copper-phosphorus alloy with low silver content. This alloy has good gap filling properties and it is well suited to bridge wide gaps. Suitable for gap brazing of copper and copper alloys. Approved by DVGW-worksheet GW 2 for copper pipes. Joint-brazing at working temperatures between -60 °C and +150 °C*. Do not use in sulphurous environment and on Fe- and Ni-alloys 

Rods: φ1.5-5.0mm  Length: 50-1000mm

Wire and Flat wire:  φ0.8, 1.0, 1.2, 1.6mm

Other dimensions are available upon request

Working temperature: 740 °C
Melting range: 643- 790 °C
Specific gravity: 8.1 g/cm³
Tensile strength: 250 N/mm²
Elongation: 5 %