Acetylene torch, induction and resistance heating

Thin fluid copper-phosphorus alloy with high silver content and high ductility, even  at  low  temperatures.  Suitable for  gap  brazing  of  copper  and  copper alloys. Recommended for joints with strong thermal load and vibrations. Joint- brazing at working temperatures between -70 °C and +150 °C. Do not use in sulphurous environment and on Fe- and Ni-alloys.

Rods: φ1.5-5.0mm  Length: 50-1000mm

Wire and Flat wire:  φ0.8, 1.0, 1.2, 1.6mm

Other dimensions are available upon request

Working temperature: 700 °C
Melting range: 643- 802 °C
Specific gravity: 8.4 g/cm³
Tensile strength: 250 N/mm²
Elongation: 10 %