Acetylene torch, induction and resistance heating

Copper-phosphorus alloy with low silver content, good flowing properties and high  ductility.  Suitable  for  gap  brazing  of  copper  and  copper  alloys.  Joint- brazing at working temperatures between -60 °C and +150 °C. Do not use in sulphurous environment and on Fe- and Ni-alloys.

Rods: φ1.5-5.0mm  Length: 50-1000mm

Wire and Flat wire:  φ0.8, 1.0, 1.2, 1.6mm

Other dimensions are available upon request

Working temperature: 710 °C
Melting range: 643- 813 °C
Specific gravity: 8.2 g/cm³
Tensile strength: 250 N/mm²
Elongation: 8 %