Acetylene torch, induction and resistance heating

Filler metal with good flowing properties and capillarity. Suitable for gap brazing of copper  and copper alloys. The seam colour is silver-gray. Joint- brazing at working temperatures between -20 °C and +150 °C. Do not use in sulphurous environment and on Fe- and Ni alloys.

Rods: φ1.5-5.0mm  Length: 50-1000mm

Wire and Flat wire:  φ0.8, 1.0, 1.2, 1.6mm

Other dimensions are available upon request

Working temperature: 670 °C

Melting range: 650- 700 °C

Specific gravity: 8.8 g/cm³